C-E3 Series: Difference between revisions

From Kerbal Powers Wiki
Jump to navigation Jump to search
(made page for C-E3 triholer)
 
(pictures)
Line 1: Line 1:
The C-E3 aka Tri Holer is a narrow body tri jet built and designed in the Kingdom of Constadia as a part of a bulletin set out by the CAG to create a domestically produced airliner for use in mid to short range flights at an affordable cost.
+
The C-E3 aka Tri Holer is a narrow body tri jet built and designed in the [[Kingdom of Constadia]] as a part of a bulletin set out by the CAG to create a domestically produced airliner for use in mid to short range flights at an affordable cost.
   
  +
The designs specifications called for a minimum of 2 engines and passenger capacity of 69 or higher the result of this set of specifications was the C-E3 1000 series of aircraft which were a triplane configuration medium range stol capable
{{Craft|name=C-E3|image=C E3 front veiw.jpeg|full_name=Constadian_Engine3|imagedesc=an RCA C-E3 taking off|type=Narrow body passenger liner|origin=Constadia|design_start=2197|design_end=2198|prod_start=2198|designer=Leading Incorporated|serv_start=2198|operators=Royal ConAir|serv_end=N/a|prod_end=N/a}}
 
  +
  +
rugged aircraft for use anywhere in the [[Kingdom of Constadia]] and Veiid.
  +
  +
== Specifications ==
 
{{Craft|name=C-E3|full_name=Constadian_Engine3|type=Narrow body passenger liner|origin=Kingdom of Constadia|design_start=2197|design_end=2198|prod_start=2198|designer=Leading Incorporated|serv_start=2198|operators=Royal ConAir|serv_end=N/a|prod_end=N/a}}
  +
{| class="wikitable"
  +
|+
  +
!Varient
  +
!length
  +
(meters)
  +
!width
  +
(meters)
  +
!max speed
  +
!Passenger capacity
  +
|-
  +
|C-E3 1001
  +
|28.3
  +
|23.7
  +
|200m/s
  +
|98
  +
|-
  +
|C-E3 1002
  +
|30.0
  +
|23.7
  +
|220m/s
  +
|120
  +
|-
  +
|C-E3 1003
  +
|24.8
  +
|23.7
  +
|203m/s
  +
|69
  +
|}
  +
  +
== Controversies ==
  +
due to the rushes nature of the Triholers development there were quite a few early teething problems with the 1000 varient including problems with the navigational displays, cockpit heating, engine cooling, engine fuel consumption, among many other problems leading to a poor saftey record.
  +
  +
== Photographs ==
  +
[[File:C E3 front veiw.jpg|thumb|510x510px|C-E3 1001 in RCA livery]]
  +
[[File:C E3 bottom.jpg|thumb|510x510px|C-E3 1001 taken from a undisclosed military aircraft]]
  +
[[File:C E3 rear.jpg|thumb|512x512px|Imagine of the iconic Engine layout of the Tri holer]]
 
[[Category:Passenger Aircraft]]
 
[[Category:Passenger Aircraft]]

Revision as of 18:51, 22 December 2025

The C-E3 aka Tri Holer is a narrow body tri jet built and designed in the Kingdom of Constadia as a part of a bulletin set out by the CAG to create a domestically produced airliner for use in mid to short range flights at an affordable cost.

The designs specifications called for a minimum of 2 engines and passenger capacity of 69 or higher the result of this set of specifications was the C-E3 1000 series of aircraft which were a triplane configuration medium range stol capable

rugged aircraft for use anywhere in the Kingdom of Constadia and Veiid.

Specifications

C-E3
Constadian_Engine3
Narrow body passenger liner
National Origin Kingdom of Constadia
Production History
Designed
2197 - 2198
Produced
2198 - N/a
Designer Leading Incorporated
Service History
In Service
2198 - N/a
Used By Royal ConAir


Varient length

(meters)

width

(meters)

max speed Passenger capacity
C-E3 1001 28.3 23.7 200m/s 98
C-E3 1002 30.0 23.7 220m/s 120
C-E3 1003 24.8 23.7 203m/s 69

Controversies

due to the rushes nature of the Triholers development there were quite a few early teething problems with the 1000 varient including problems with the navigational displays, cockpit heating, engine cooling, engine fuel consumption, among many other problems leading to a poor saftey record.

Photographs

C-E3 1001 in RCA livery
C-E3 1001 taken from a undisclosed military aircraft
Imagine of the iconic Engine layout of the Tri holer